5. USB-C Charging Port
6. Pair/Reset Indicator Light
7. Charging Case Indicator Light
Power On/Off
Earphones will turn on when the charging case is opened. To turn off, place the earphones in
the charging case, charging will start when the cover is closed.
Charging Case Wired/Wireless Charging
Besides using the included USB-C charging cable to charge the charging case, the charging
case can be charged by a compatible wireless charging device.
Noise Cancellation On/Off
Press and hold the MFB of the right earphone for 2 seconds to switch between different
modes. [Noise Cancellation Off] – [Ambient On] – [Noise Cancellation On]
Pairing
Left and right earphones will turn on and connected automatically when the charging case is
opened, “pairing” voice prompt will be heard.
For a new device connection, go to Bluetooth settings on your device and search for new
devices (new Monster device), “connected” voice prompt will be heard once the earphones
are paired.
When turning on, the earphone will try to connect to the last connected device. To pair a
new device, turn off the currently connected Bluetooth device.
Connect other devices
Keep the earphones in the charging case and leave the cover open. Press and hold the Pair /
Reset to Factory Settings Button for about 5 seconds until the light indicator starts to flash.
It is now in pairing mode. Activate the Bluetooth on your device and set it to search for new
devices.
Volume Control
The earphones do not have a volume control function. After Bluetooth connection, the
To Next Page
Loading...
