12 | BLUETOOTH
Bluetooth
®
You can listen to tracks from a media device if connected
to the unit via Bluetooth
®
wireless technology.
• When the turntable is switched on and the tonearm is
placed on the arm rest, Bluetooth
®
mode is automatically
activated (if there is no USB plugged in).
• The first time you use your Bluetooth
®
device with the
turntable, you will need to pair them with one another.
• Activate Bluetooth
®
on your compatible device, and set it to
search for compatible devices.
• Select 'MT-TT02' from the list of found devices.
• If your device asks for a passkey (depending on the device
manufacturers, model, and software version), then enter
digits “0000” and press OK.
• You can also use the control buttons on the right side of the
turntable to play, play previous/next and pause the music.
• To unpair Bluetooth
®
connection , press and hold the
button
Pairing Bluetooth
®
Devices
The operational range between this turntable and
a Bluetooth
®
device is approximately 10 metres
(without any object between the Bluetooth
®
enabled device and the unit). Any obstacle
between the devices can reduce the operational
range.
Before you connect a Bluetooth
®
enabled
device to this unit, ensure you know the device’s
capabilities. Compatibility with all Bluetooth
®
devices is not guaranteed.
If the signal strength is weak, your Bluetooth
®
receiver may disconnect, but it will re-enter pairing
mode automatically.
If a mobile phone on which you are playing music
receives a call, the music will be interrupted. The
phone call audio however is not played via the
speakers. Once you end the call, the devices are
connected to each other again and playback
resumes.
Your device will also be disconnected when your
device is moved beyond the operational range. If
you want to reconnect your device, place it within
the operational range.
If the connection is lost, follow the instructions
(left) to pair your device to the player again.
To Next Page
Loading...