To Next PageTo Next PageWhy are the burner flames burning yellow on my MONTAGUE Broiler?
If the burner flames on your MONTAGUE Broiler are burning yellow, it could be due to incorrect gas pressure or issues with the secondary air. Check the gas pressure. If the gas pressure is correct, adjust or clean the air mixer.
What to do if one or more burner flames cannot be adjusted on my MONTAGUE 36W36 Broiler?
If one or more burner flames cannot be adjusted on your MONTAGUE Broiler, it could be due to a dirty Venturi passage, incorrect gas pressure, cracked, broken, or missing ceramics, or a faulty burner valve. Perform the Main Burner Orifice Removal and Replacement Procedure. Check and adjust gas pressure. Replace damaged or missing ceramics. Perform the Main Burner Removal and Replacement Procedure.
How to fix the heat of one or more burners is not uniform over the surface of the ceramic tiles on my MONTAGUE Broiler?
If the heat of one or more burners is not uniform over the surface of the ceramic tiles on your MONTAGUE Broiler, it could be due to clogged burner ports, broken or missing ceramics, a dirty venturi passage, or wrong gas pressure. Clean burner ports or perform the Main Burner Removal and Replacement Procedure. Replace broken or missing ceramics. Clean air mixer and venturi. Check and adjust gas pressure.
General| Category | Broiler |
|---|---|
| Model | 36W36 |
| Width | 36 inches |
| Frequency | 60 Hz |
| Material | Stainless Steel |
