Need help?Do you have a question about the Montarbo Fire 10A and is the answer not in the manual?
General| Type | Active Speaker |
|---|---|
| Configuration | 2-way |
| Frequency Response | 55 Hz - 20 kHz |
| Max SPL | 125 dB |
| Output Connectors | XLR |
| LF Driver Size | 10 inch |
| HF Driver Size | 1 inch |
| Amplifier Power (RMS) | 300W |
| Input Connectors | XLR, 1/4" Jack |
General guidelines for cleaning, handling, and protecting the speaker system.
Instructions for safely connecting the speaker to the mains power supply.
Guidance on connecting the speaker to audio mixers using various cable types.
Explanation of input sensitivity, clipping, and its effects on audio quality.
Practical advice on setting levels to prevent signal distortion.
Detailed technical data and specifications of the Fire10A speaker system.
Graphical representation of the speaker's frequency response.
Description and pinout of the various input and output connectors.
Diagrams illustrating typical system setups and wiring configurations.
List of available replacement parts for the speaker system.
To Next Page
