Need help?Do you have a question about the Montarbo 260 and is the answer not in the manual?
General| Max. SPL | 126 dB |
|---|---|
| Impedance | 8 ohms |
| Power (Continuous) | 300 W |
| Power (Program) | 600 W |
| Maximum SPL | 126 dB |
| Connectors | 2 x Speakon |
| Power Handling | 300 W (continuous), 600 W (program) |
Crucial safety warnings to protect users and maintain product warranty, requiring careful reading before operation.
Guidance on product maintenance, emphasizing the absence of user-serviceable parts and the need for authorized personnel.
General introduction to the 2-way (260) and 3-way (412, 415) bass reflex loudspeaker systems and their intended applications.
Detailed labeling and description of the physical components within the 260, 412, and 415 loudspeaker models.
Information on the parallel input configuration using XLR/Jack sockets and advice on using quality unshielded cables.
Details on unbalanced XLR and Jack connectors, including pinout standards and how balanced connectors are handled.
Essential guidelines for maintaining the loudspeaker's performance and longevity, covering environmental factors and cleaning.
Instructions for safely connecting loudspeakers to mixers/amplifiers, including specific wiring advice for unbalanced outputs.
Detailed technical data and performance parameters for the 260, 412, and 415 loudspeaker systems.
Internal schematic diagrams illustrating the signal path and component layout for each loudspeaker model.
Practical examples demonstrating various wiring configurations for connecting the loudspeaker systems.
A comprehensive list of available spare parts for the 260, 412, and 415 models, with identification codes.
Technical specifications for the speaker systems, including impedance, frequency range, power capacity, and sensitivity.
In-depth specifications for individual speaker drivers (woofer, midrange, tweeter) and crossover network components.
Schematic diagrams showing the internal structure and signal flow of the 260, 412, and 415 loudspeaker systems.
Graphical representations of the measured frequency response for the 260, 412, and 415 models.
Illustrates connecting passive systems to a powered mixer's L/R outputs (Fig. 1A).
Shows parallel connection of passive systems, daisy-chaining inputs (Fig. 1B).
List of spare parts for the Montarbo 260 loudspeaker, with part numbers and diagrams.
List of spare parts for the Montarbo 412 loudspeaker, with part numbers and diagrams.
List of spare parts for the Montarbo 415 loudspeaker, with part numbers and diagrams.
To Next Page
