active, processor controlled, bi-amped speaker system
W400A
Hanging the speakers. Tips and warnings
The W400A speaker features 6 fly points built into
the cabinet (patent pending) for easily hanging it
without using special or additional accessories.
The position of the 6 fly points allows for great flexibility
in terms of speaker configuration.
☛
See examples at page 26.
In order to guarantee a safe and secure installation,
observe the following guidelines:
1 - When hanging the speakers, use only means
of suspension (in accordance with the safety
regulation valid in the country of use) having
a carrying capacity rated and guaranteed by
the manufacturer.
2 - Avoid knots. Use cables with pre-made eyelets
instead.
3 - Never depend on only one means of suspension
for hanging speakers (for example, one cable,
passing through several fly points to connect
two speakers); always use at least two of them
and make sure they are sufficiently strong.
So, if one fails the other will sustain the load.
4 - Never hang more than three speakers together
in a cluster (each speaker is designed to support
up to two other speakers).
5 - Always make sure that the truss structure
intended to support the speakers is sturdy enough
to hold their weight, even under stressful, adverse
conditions.
Always consider the effect of additional loads
(for example, wind in case of outdoor
installations).
Important !
17
ENGLISH
To Next Page
Loading...
