What to do if 'Err' shows on the LCD of my Monument Grills 85001?
If your Monument Grills Grill displays 'Err' on the LCD, it indicates a sensor failure. Inspect the sensor or replace it to resolve the issue.
Why does my Monument Grills Grill ignition fail?
If the Monument Grills Grill fails to ignite, there might be several reasons: * If there is fuel in the fire cup but it is not ignited, turn the dial off and on, and try to ignite again. * If there is no fuel in the fire cup because the fuel pellet is too large, change to smaller pellets. * If the feed screw stops, check whether the circuit is abnormal or change the feed motor. * If the ignition rod does not work, check whether the circuit is abnormal or change the ignition rod.
What to do if my Monument Grills Grill shows low temperature protection?
If your Monument Grills Grill experiences low temperature protection, displaying 'ERL' after detecting a temperature less than 135°F for 6 minutes, shut off the display, unplug the power, plug the power again, and then start the device.
Proper placement of the pellet grill in an outdoor, ventilated area, away from flammable materials.
Guidelines for choosing standard wood pellet fuel, including size and storage recommendations.
Pre-operation checks for safe electrical connections and the surrounding environment.
Detailed explanation of the control panel buttons, LCD display, and knob functions.
Step-by-step instructions for safely powering down the pellet grill.
Guidance on initial burn-in, cooking procedures, using meat probes, and cleaning the grill.
Details on button functions, LCD indicators, and system operational feedback like fan and motor status.
General| Type | Gas Grill |
|---|---|
| Fuel Type | Propane |
| Burners | 4 |
| Burner Type | Stainless Steel |
| Material | Stainless Steel |
| Side Burner | Yes |
| Side Shelves | Yes |
| Wheels | Yes |
| Ignition Type | Electronic |
| BTU Output | 60, 000 BTU |
To Next Page
