mooas MO-MC-RLEDW2 - Composition; Dual LED Clock; LED nightlight; 5 m DC USB cable

配件 Composition
- 雙LED時鐘 Dual LED Clock x 1
（CR2032電池包括用於時間記憶功能）(CR2032
battery included for time memorising function)
- 支架時鐘 Clock stand x 1
- LED夜燈 LED nightlight x 1
- 適配器（5V 2A） Adaptor (5V 2A) x 1
- 5m DC USB電線 5m DC USB cable x 1
- 遙控器（CR2032電池包括） Remote Control
(CR2032 battery included) x 1
- 1m DC USB電線 1m DC USB cable x 1
- 使用手冊 Manual x 1
How to USE 使用方法
CR2032電池僅用於時間記憶功能。若在連接和斷開USB電纜後重設時間，請更換新的電池。
The CR2032 battery is only for the time memorising function. If time setting is reset after connect and
disconnect the USB cable, please change the battery into new one.
同時使用LED燈和LED鐘
1. 打開LED燈中間的外殼，檢查電源接觸部分。
2. 將LED燈的電源連接至LED雙時鐘背面的電源接觸點。
3. 將USB線連接到LED燈和LED鐘背面的電源插座上，LED燈
和鐘就會亮起。
4. 您可以將接上電源的LED燈和LED雙時鐘放在架子或掛在牆
上使用。
Use connected LED mood light and Dual LED clock together
1. Open the case in the middle of LED mood light and check
power contact part.
2. Connect the power contact of LED mood light and power
contact on the back side of Dual LED clock.
3. Connect USB cable with power socket on the back side of
LED mood light and LED time display and mood light will
comes on.
4. You can use connected LED mood light and Dual LED clock
on stand or hang it on the wall.