Setting the pump
4 of 6
How to Set a Pump – Infinity EnteraLite Feeding Pump
Clear the volume. Push
VOL/TOTAL.
Push CLEAR. Pump
should say “0”.
Put the pump in the
backpack or attach it to
the IV pole.
Connect the bag to the end
of the feeding tube. Put the
end of the tubing into your
child’s G or NG tube.
4 5 6
Start the feed.
Push RUN/PAUSE to
start pump.
When feed is done turn pump o by holding
on/o for 3 seconds.
* If feed is not done, press pause, refill bag,
reset pump if needed, and press run.
* Keep bag in fridge between feeds or when
bag is not in use.
1
Starting the feeding
2
To Next Page
Loading...
