Setting the pump
3 of 6
How to Set a Pump – Infinity EnteraLite Feeding Pump
Open the pump door.
Close the pump door.Put tubing loop over the
pump wheel.
Pull tubing to the right.
7 98
Turn the pump on.
Push ON – hold down
for 3 seconds. or until
the pump beeps.
Set the dose.
Make sure DOSE shows in
the left corner. Use the +
or – to set the dose. Set the
dose to
__________________mL.
• This is how much your
child is fed.
Set the pump rate.
Push the RATE/DOSE button.
Make sure RATE shows in the
left corner. Use the + or – to set
the rate. Set the rate to
_________________ mL/hr.
• This is how fast your pump
runs.
1 32
To Next Page
Loading...
