Need help?Do you have a question about the Moog MF Drive and is the answer not in the manual?
General| Type | Overdrive/Distortion |
|---|---|
| Technology | Analog |
| Power Requirements | 9V DC |
| Bypass Switching | True Bypass |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Weight | 1.5 lbs |
| Controls | Drive, Tone, Filter |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Power Source | 9V DC power supply |
| Expression Pedal Input | Yes |
| Filter Type | Low Pass |
| Filter Frequency Range | 20 Hz to 20 kHz |
Specifies 100% Analog signal path, true bypass, and +9VDC power.
Details weight, enclosure, dimensions, and drive switch gain ranges.
Describes filter resonance, high-pass, and tone control frequency effects.
Covers input impedance, output impedance, and current consumption.
Explains filter interaction with Tone knob and Peak switch for tone shaping.
Details assignment to filter cutoff for swells or wah effects.
Details Moog Music's warranty against defects for one year from purchase date.
Explains Gain and Drive controls for clean to aggressive tones with OTA and filter distortion.
Details Output control for hot levels, Peak for mid/high boost, and tone shaping.
Covers Tone knob for voicing (dark, scooped, articulate) and its responsiveness.
To Next Page
