Need help?Do you have a question about the Moog moogerfooger MF-103 and is the answer not in the manual?
General| Type | Analog Delay |
|---|---|
| Input Impedance | 1 MΩ |
| Dimensions | 6.5" x 4.5" x 2.5" |
| Weight | 2 lbs |
| Filter | Low Pass |
| Inputs | 1/4" CV input for delay time |
| Outputs | Audio |
| Output Impedance | 1 kΩ |
| Power Supply | 9V DC |
Outlines the default settings for familiarizing with the MF-103.
Setup for a deep, resonant phaser effect using 12-stage mode.
Configuration to simulate a Leslie rotating speaker effect.
Setup for manual sweep control, similar to a wah pedal effect.
Configuration for creating ring modulator-like sounds via fast modulation.
Details acceptable voltage and current for the power adaptor.
Explains the 1/4" stereo jacks for pedals and control voltage.
Overview of the MF-103 as an analog effects module with phaser and LFO.
Lists and describes all rotary controls, switches, and LEDs on the front panel.
Details the function and specifications of all input and output jacks.
Covers physical case, dimensions, weight, and power requirements.
To Next Page
