1. In the condition of working, press the wind speed button, the buzzer will ring for one
time.
2. Press again to adjust the wind speed among the circulation of Low grade, Middle
grade and High grade with buzzer rings, the corresponding indicator will be on.
Notice: The wind speed adjustment couldn’t operate in the status of shutdown.
When the accumulated operation of the air purifier reaches 2200 hours, the indicator
flashes red; the new filter is required to be replaced. After replacing the new filter, press
and hold the power button for about 7 seconds to release the alarm.
Notice: Users do not need to reset when using the machine for the first time after
installing the filer.
Button Operation
support@mooka.co
- 07 -
Wind Speed Button
Reminder of Replacing Filter
To Next Page
Loading...
