EasyManua.ls Logo

moon CD-1 - User Manual

moon CD-1
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner’s Manual
MOON
CD-1
CD Player
Question and Answer IconNeed help?

Do you have a question about the moon CD-1 and is the answer not in the manual?

Summary

Important Safety Instructions

General Operating Precautions

Follow instructions, clean with dry cloth, avoid water and heat sources, and ensure proper ventilation.

Electrical Safety Warnings

Do not defeat grounding, unplug during storms, refer servicing to qualified personnel, avoid exposing to rain/moisture.

Appliance Usage Guidelines

Use only specified accessories, carts, stands, and avoid naked flame sources.

Advanced Safety Precautions

Power Cord and Connection Safety

Always disconnect power before connecting/disconnecting cables; use three-conductor cord with earth ground.

Operational and Environmental Limits

Avoid flammable chemicals, never remove covers, keep away from liquids, extreme temperatures, or explosive atmospheres.

Installation & Placement

Ventilation and Surface Requirements

Requires ample space for heat dissipation on a solid, level surface; avoid heat sources and closed cabinets.

Front Panel Controls

Disc Loading and Playback Controls

Instructions for loading discs, playing, pausing, resuming, and stopping playback.

Rear Panel Connections

Analog Audio Output

Connects to stereo analog input on preamplifier or integrated amplifier via RCA connectors.

Digital Audio Output (S;PDIF)

Used as a CD transport for external DACs via RCA connector.

SimLink

Operating the CD-1

Power On;Off Sequence

Power up CD player before preamplifier, power down after preamplifier to avoid noises.

Remote Control Operation

Remote Control Buttons

Details on buttons for track selection, playback, pause, stop, search, and scan.

Remote Control Features

Specifications

Performance Specifications

Details on configuration, power, transport, DAC, frequency response, THD, and dynamic range.

Analog and Digital Outputs

Specifications for analog output voltage, impedance, digital output type, and impedance.

moon CD-1 Specifications

Power IconPower
power supply transformer25VA
power supply capacitance13, 200µF
power consumption at idle15 Watts
AC power requirements120V / 60Hz or 240V / 50Hz
Audio Performance IconAudio Performance
frequency response (audible)20Hz - 20kHz +0/-0.2dB
frequency response (full range)2Hz - 72kHz +0/-3dB
THD at 1kHz, 0dBFS (A-weighted)< 0.002%
intermodulation distortion< 0.005%
dynamic range> 110dB
signal-to-noise ratio> 110dB @ full output
channel separation> 106db
intrinsic jitter< 300 picoseconds RMS
Analog and Digital Outputs IconAnalog and Digital Outputs
analog output impedance - standard100Ω
max. analog output at 0dBFS - standard2.0 Volts RMS
digital output impedance - S/PDIF75Ω (0.5 Volts)
Weight and Dimensions IconWeight and Dimensions
shipping weight14 lbs / 6.25 Kgs
dimensions (W x H x D)16.9 x 3 x 12.75 inches

Related product manuals