Need help?Do you have a question about the moon Eclipse and is the answer not in the manual?
Highlights the CD player's advanced design elements for superior audio performance.
Lists all the accessories provided with the MOON Eclipse CD Player.
Details critical safety warnings regarding electrical shock, heat, and voltage.
Instructions for unlocking the CD drive mechanism before playing discs.
Instructions for locking the CD drive mechanism for safe transport.
Guidance on where to place the player for proper heat dissipation and performance.
Instructions for attaching and adjusting the player's support tips.
Recommendation for cleaning the player's heat sinks to ensure proper cooling.
Advice on making audio connections before AC power and on proper CD maintenance.
Details on connecting the CD player to its external power supply using the DB15 cable.
Instructions for connecting the AC power cable and recommendations for power outlets.
Advice on positioning power and interconnect cables to minimize interference.
Explanation of the clamp design's optimization for disc stability and sound quality.
Step-by-step guide on how to correctly load a compact disc into the player.
Details on how the player reads the disc and what information is displayed.
Describes the actions taken by the player when the top loading drawer is opened.
Details the information shown in the top panel's digital display window.
Explains the function of the play button and how to restart a track.
How to scan backward or forward through tracks with speed adjustment.
How to search for specific tracks within the disc's table of contents.
Instructions for pausing and resuming CD playback.
Explains the function of the stop button and its effect on the laser.
Details the main digital display and its modes for track number, elapsed, or remaining time.
Explains the meaning of the six indicator LEDs on the front panel.
How the Stand By button functions and its effect on the circuitry and display.
Allows turning on/off both digital displays, potentially improving sonic performance.
Inverts signal phase by 180 degrees for potential realism improvement.
Selects external digital sources, allowing the player to function as a DAC.
Plays tracks on a disc in a completely random order.
Plays the first 10 seconds of each track on the disc.
Cycles through three display modes for track and disc timing information.
Allows programming a selection of tracks in a desired listening order.
Manages repeating the entire disc, current track, or programmed selections.
Describes single-ended RCA and balanced XLR analog audio output options.
Details S/PDIF BNC inputs and outputs for digital sources and transport.
Identifies the DB15 connector for the DC input from the external power supply.
Advice on cleaning rear panel connectors for optimal signal integrity.
Steps for correctly powering on the CD player and its power supply for the first time.
Procedure to avoid speaker pops when powering the unit and preamplifier on/off.
Recommendation to keep the player powered on for optimal performance and break-in.
Introduction to the FRM full-function remote control and its compatibility.
Instructions for installing batteries into the remote control.
How to select the CD input and use the remote's playback functions.
Description of buttons like Play, Skip, Pause, Scan, Repeat, and Stop.
Details the player's configuration, including transformers and transport mechanism.
Lists key audio specifications like frequency response, THD, dynamic range, and SNR.
Details analog and digital outputs, impedances, and digital input/output formats.
Specifies power consumption, AC requirements, fuse, weight, and dimensions.
Defines the pin assignment for balanced inputs and outputs (Ground, Positive, Negative).
Instructions for completing and mailing the warranty card or registering online.
Guidance on contacting dealers or service departments for issues and transport packing.
Details warranty periods for the player and CD drive, and conditions for validity.
Statement limiting Simaudio Ltd.'s liability to repair or replacement of the product.
Provides contact details for Simaudio Ltd. in Canada and Simaudio USA.
General| Digital Inputs | 1x AES/EBU, 2x S/PDIF (RCA), 1x S/PDIF (TosLink), 1x USB |
|---|---|
| Analog Outputs | 1 pair XLR, 1 pair RCA |
| Output Voltage | 2.0 V RMS (RCA), 4.0 V RMS (XLR) |
| Frequency Response | 20 Hz - 20 kHz ±0.1 dB |
| Signal-to-Noise Ratio | 120 dB @ 1kHz, A-weighted |
| THD+N | <0.0005% @ 1kHz |
To Next Page
