3. Adjust the temperature: Press the knob, then turn it to adjust the temperature,
clockwise to increase the temperature, counterclockwise to decrease the temperature.
Press the knob again to confirm and exit the temperature setting.
4. Start: Press the "Start/Stop" button, there will be a prompt beep, the kettle starts to
heat.
5. Stop: Press the "Start/Stop" key to exit the heating program with a prompt beep.
6. Standby: In standby state, if there is no operation for 30 seconds, all the lights
(including the display) will be off;
7. Anti-error operation: In the black screen state, you need to wake up the screen by
pressing any button before you operate.
8. Set or Exit Keep Warm: Press "Keep warm" button to set or exit keep warm mode.
9. Boil-dry Protection: The kettle will never burn out, it will auto shut-off after the water
reaches the desired temperature. When the water capacity is less than 0.5L, the water
will boil before reaches the set temperature.
(1）Fill the kettle with 0.5-0.8L cold water, then put the kettle on the base and cover the lid,
ensure that the installation is in place. Pay attention to put the power cord into the
buckle of the base to avoid shaking the base, plug in the base with the correct safety
power supply (as required by the base nameplate), a beep sound can be hear and the
screen lights up.
(2）Electric kettle offers 6 different preset temperatures, you can turn the knob to select
the menu according to your needs. Clockwise from top to bottom will show "Boil water
(100℃)", "Green tea (80℃)", "Black tea (100℃)", "White tea (85℃)", "Oolong tea
(90℃)", "Coffee (100℃)", counterclockwise will show the menu from bottom to top.
If you need set the other exact temperature, you can press the knob and turn the knob
to adjust the water temperature, 1 ℃ for every jump.
Note: There will be a short prompt beep for every turn of the knob.
(3）After selecting the mode or temperature, press the "Start/ Stop" button again to start
the program and the kettle will start heating. After the water reaches the desired
temperature, the kettle will beep for 3 times to remind that the water is boiling. The
kettle will stop heating and exit the program. If the user set the keep warm function,
it will automatically turns on, the kettle will maintain the selected temperature for
2 hours.
How to use
6
To Next Page
Loading...