Need help?Do you have a question about the MOOV MC130JUST and is the answer not in the manual?
Essential safety guidelines for operating the electrical equipment, including warnings and precautions.
Visual guide for wall-mounted installation, showing component placement and connections.
Steps for setting up the electronics unit for the first time, including language and time settings.
Explanation of command keys, screen layout, and LED indicators for operation.
Settings for language, date, time, sensors, and operating modes.
Steps for calibrating temperature, salt, pH, and setting inversion frequency.
Adjusting salinity, using Boost mode, and pH probe calibration.
Instructions for pairing, activating, and managing Bluetooth connections with the electronics unit.
Performing chlorination tests and resetting system parameters to factory defaults.
Explanation of wintering mode and steps for protecting the unit from cold weather.
Details on common alarms, their causes, checks, remedies, and deactivation.
Overview of system information like software versions, serial numbers, MAC addresses, and internal temperature.
Instructions for assembling in-line and PICO cells, plus procedures for dismantling and cleaning.
Handling, installation of pH probe, probe holder, and sensor installation.
Installation and purpose of the Pool Ground Kit for static electricity transfer and protection.
Details about the guarantee period, scope, after-sales services, and warranty claims.
General| Working Pressure | 0.1-0.4MPa |
|---|---|
| Product Weight | 1.2kg |
| Installation Type | Under Sink |
| Certification | NSF |
| Water Flow | 1.5 L/min |
To Next Page