What to do if MOOV MI500 has no power?
If your MOOV Inverter has no power, first, wait until the power recovers. If that doesn't work, ensure the power switch is turned on. Finally, check the fuse and replace it if it's burned.
What to do if MOOV MI500 Inverter breaker is off?
If the breaker for your MOOV Inverter is off, check to turn it on.
Provides a diagram illustrating the water piping connections for the heat pump.
Details the electrical wiring connections and requirements for the heat pump.
Covers mounting, ventilation, clearance, and wiring guidelines, including GFCI and cable layout.
Explains the display, symbols, and functions of the heat pump's control panel.
Details how to adjust set temperature and select operating modes (Auto, Heating, Cooling).
Explains automatic and compulsory defrosting, and how to shift between Celsius and Fahrenheit.
Checks for proper installation, wiring, and component connections before operation.
Guides through the startup sequence, including water pump operation and checking for leaks.
Advises on avoiding overheating, blocking airflow, and handling abnormal conditions.
Emphasizes keeping power switches away from children and protecting against lightning.
Caution regarding electric shock and touching electronic components during maintenance.
Instructions for draining water, covering the heater, and cleaning the coil.
Provides solutions for common faults like no power or running but not heating.
Lists various error codes (E, P, F) and their corresponding failure descriptions.
Details warranty start time, validity, and conditions for claims.
Lists claims not approved, factors affecting efficiency, and contact information.
General| Output Voltage | 220V |
|---|---|
| Output Power | 500W |
| Output Frequency | 50Hz |
| Protection Features | Overload, Short Circuit |
| Cooling | Fan Cooling |
To Next Page
