MOPEKA Pro Sensor User Manual

www.mopeka.com
Page 1 of 14
M200004E
Pro Sensor Models M1017--- (Propane)
INTENDED USE OF THE M1017 SENSOR IS TO MEASURE THE AMOUNT OF LIQUID PROPANE INSIDE A PROPANE
TANK MEETING THE SPECIFATIONS BELOW, UNDER THE CONDITIONS LISTED BELOW.
THIS DEVICE IS INTENDED FOR OUTDOOR USE ONLY.
WARNING
USE OF THIS DEVICE IN A MANNER OTHER THAN STATED IN THIS MANUAL, MAY RESULT IN IMPAIRMENT OF
THE DESIGNED SAFETY PROTECTION AND THUS AN UNSAFE CONDITION.
SPECIFICATIONS
MEASUREMENT METHOD
Ultrasonic
FLUID
Propane
TANK TYPES
Steel or Aluminum
Not intended for use on composite cylinders.
TANK SIZES
Horizontal and Vertical Tanks Up to 48-inch fluid height
Envelope Dimensions
73 mm Diameter x 7.3 mm Thickness (2.87 x 0.29 inches)
Mounting location
Tank Bottom
Steel Tanks use magnet version
Aluminum tanks require collars attached with pre-applied adhesive
Other mount devices also available
Suitable for these locations
CLASS I, DIVISION 2, GROUP D
CLASS I, ZONE 2, GROUP IIA
OPERATING TEMPERATURE RANGE
-30° TO 55°C
TEMPERATURE CODE
T6
BATTERY
ONE, CR2032 COIN CELL (3V)
HUMIDITY RANGE
0 - 100%
MAX ALTITUDE
4000m
WARNING
EXPLOSION HAZARD-BATTERIES MUST ONLY BE CHANGED IN AN AREA FREE OF IGNITIBLE CONCENTRATIONS.
WARNING
THIS DEVICE IS NOT TO BE REPAIRED OR OTHERWISE MODIFIED.
MOPEKA PRODUCTS LLC
MAILING ADDRESS: 445 FM 1983, COLORADO CITY, TX 79512
www.mopeka.com
support@mopeka.com

MOPEKA Pro Sensor Specifications

General

Brand	MOPEKA
Model	Pro Sensor
Category	Accessories
Language	English

Summary

OPERATING INSTRUCTIONS

Smart Device/App Users

Guides users through installing and syncing the Mopeka sensor with a smartphone app.

Display Users

Covers syncing and using the Mopeka sensor with the dedicated display unit.

Install Sensor on Tank-Vertical Cylinders

Steel Tanks

Detailed steps for attaching the sensor to the bottom of vertical steel propane tanks.

Aluminum Tanks

Instructions for mounting the sensor on vertical aluminum tanks using a special collar.

Install Sensor on Tank-Horizontal Cylinders

Sensor Placement

Instructions for correctly positioning the sensor on the bottom of horizontal tanks.

Using the LPG Tank

App Users

How app users can check tank settings, sensor signal, and measurement quality.

Display Users

How display users can interpret readings, alerts, and automatic monitoring.