To Next PageTo Next Page
Need help?Do you have a question about the Mora MMIX and is the answer not in the manual?
We recommend that you engage a professional (licensed) plumber.
Install the adaptor by hand, then twist it half a turn more using an appropriate tool.
Replace the cartridge: First turn off the main supply. Dismantle the valve 1-4.
Replace ceramic cartridge: First turn off the main supply. Perform sequences in order [1]-[6].
Dismount the aerator and clean the insert from water impurities.
The indicating arrow on the control stem is set towards either "Hot" or "Cold".
The maximum temperature restriction is adjusted by repositioning the temperature ring (a).
The water must be drained from the main supply pipework and from the mixer.
Use a neutral or slightly alkaline (pH 6-9) liquid detergent and a soft cloth.
General| Brand | Mora |
|---|---|
| Model | MMIX |
| Category | Bathroom Fixtures |
| Language | English |
