To Next Page
J
John MillerJul 27, 2025
How to change the input source on Morel HOGTALARE?
- HheatherthomasJul 27, 2025
To switch to the correct audio source, press the source button on your Morel Speakers.
How to change the input source on Morel HOGTALARE?
To switch to the correct audio source, press the source button on your Morel Speakers.
What to do if there is no sound from my Morel Speakers?
If there is no sound from your Morel speakers, first, verify that the device is set to the correct input source by pressing the source button. Next, ensure an audio source is properly connected via BT or a 3.5mm aux cable. Also, check that the volume isn't too low on either the sound source or the speaker, and that the audio source is playing, not paused.
Why can't I connect my device via BT to Morel Speakers?
If you cannot connect your device via BT to Morel speakers, make sure BT is enabled on your device and that the devices are within 10 meters of each other without obstructions. Note that the speaker searches for devices for 3 minutes after the pairing button is pressed. If your device asks for a pin code, use 0000. If your device only supports BT (hands-free) area function, connect using a 3.5mm aux cable instead.
Why does the BT connection drop out on my Morel Speakers?
If the BT connection drops out on your Morel speakers, ensure the devices are within 10 meters of each other, free from obstacles like walls or doors. Also, be aware that devices like microwave ovens, wireless network adapters, fluorescent lights, and gas cookers can interfere with the BT signal.
What to do if the sound is distorted on my Morel Speakers?
If the sound from your Morel speakers is distorted, turn down the playback volume on the sound source or the speaker. Also, the sound file (mp3) may be of poor quality; try another sound file or music player.
How to fix low sound on my Morel Speakers?
If the sound from your Morel speakers is too low, make sure the audio cable is properly connected and not damaged. Also, slightly increase the volume on your sound source, then slightly increase the volume on the speaker.
What to do if my Morel Speakers have erratic performance?
If your Morel speaker is showing erratic performance, move the speaker to another location. Alternatively, turn off or move the interfering electronic device.
Solutions for when the speaker fails to power on.
Troubleshooting steps for when there is no audio output.
Troubleshooting problems with connecting or maintaining Bluetooth connection.
General
