39
8.2 Hand Operated Controls
Handbrake
The handbrake on your Morgan Aero 8 only operates the rear wheel brakes. The handbrake lever is a
conventional type handbrake. Pull the lever upwards until the brake begins to operate and hold the vehicle in a
stationary position securely.
To release the handbrake push the button on the end of the lever and slowly release the lever ensuring that the
vehicle will not move or roll unless required.
Warning
Ensure the handbrake is securely applied especially when the brake system is hot. As the brakes cool then a
loss in handbrake performance may be experienced resulting in the car rolling away causing an accident
resulting in serious injury or even death.
Ensure the handbrake is fully released before driving the vehicle. Failure to do so may result in damage to the
brake system and drive train components.
To Next Page
Loading...
