40
Gear lever - Manual
The gear positions are laid out in the standard H type pattern with reverse gear located to the left and then
forwards.
When in neutral the gear lever will naturally sit between 3
rd
and 4
th
gear.
Reverse gear
When engaging reverse gear ensure the vehicle is stationary and the clutch pedal is fully depressed. Move the
gear lever fully to the left and then apply pressure until the lever moves further left through an over centre
feeling before pushing forward to engage the reverse gear.
Notice
Ensure the clutch is fully depressed when changing gear. Failure to do so may result in damage to the
transmission system.
To Next Page
Loading...
