EasyManua.ls Logo

Morgan Aero - Vehicle Lifting Procedures

Morgan Aero
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66
14.2 Towing Trailers
The Morgan Aero is not designed for use as a towing vehicle for either towing trailers or other vehicles
Warning
Do not use a Morgan Aero to tow trailers or any other vehicles.
14.3 Lifting
To lift the car, use the jack supplied that is located in the tool kit in the rear of the car.
Make sure that the car cannot move backwards or forwards by applying the hand brake and chocking the cars
wheels firmly. The jack may be used for lifting front wheels by placing it under the front chassis cross member in
the centre. Do not place the jack under the engine cross member.
Notice
Care should be taken not to damage the brake pipes, wiring or any other components.
Using the jack directly under the rear sub frame mountings can lift rear wheels.
Warning
Only lift your car using the specified lifting points.
Lifting a vehicle when using a jack can be dangerous. If the vehicle falls off the jack at any time you or others
may be seriously injured or even killed.
Never lift a car when the engine is running.

Related product manuals