EasyManua.ls Logo

Moro PM 80A - MANDATORY SAFETY SIGNS

Default Icon
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rev. 00 of 01.01.2009 3 / 29
MANDATORY SAFETY SIGNS THAT MUST BE POSITIONED ON
THE WORKPLACE AND AROUND THE VACUUM PUMP
Moving parts
High temperature alert
Mandatory personal safety
devices
Do not touch the drive shaft or any other moving parts when in use.
Periodically lubricate the power takeoff.
Read this manual before starting to use the vacuum pump
Before start up verify the direction of the rotation of the switch lever to select vacuum (air flows
away from the tank) or pressure (air flows towards the tank).

Table of Contents

Related product manuals