To Next PageTo Next Page
Need help?Do you have a question about the Moro PM 80A and is the answer not in the manual?
General| Power | 0.75 kW |
|---|---|
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Flow rate | 80 l/min |
| Max Flow Rate | 80 l/min |
Describes different available models and their configurations.
Instructions for receiving, storing, and moving the vacuum pump safely.
Detailed steps for putting together, taking apart, and reassembling the pump.
Critical warning about operating the pump without essential safety valves.
Instruction to verify the correct rotational direction of the pump shaft.
Details the forced lubrication system using gears.
Describes the automatic lubrication system with a dosing pump.
Specifies the types of mineral oil suitable for the pump and gearbox.
Steps to follow for initial testing of the pump.
Details the recommended break-in period for the pump.
Procedures for safely starting the vacuum pump.
Guidelines for proper operation of the vacuum pump.
How to correctly stop the vacuum pump and disengage its drive.
Instructions for cleaning the pump body, oil tank, and valves.
Guidance on periodically verifying the functionality of various valves.
Procedures for checking and replacing the pump's vanes.
