Morphy Richards 47070 - Getting Started with Your Coffee Maker; Preparation Before First Use; Setting the Clock; Brewing Process Steps

4
4
Press the On/Off Button (12) to start the
brewing process. To stop the brewing process,
press the button a second time.
3
Close the Lid and replace the Jug on the Hot
Plate (7).
2
Spoon filter coffee into the Removable
Permanent Filter (8). We recommend 7g of
coffee per cup. Place the Filter into the Filter
Holder (9) in the coffee maker ensuring the
Filter Holder clicks into place.
Using your coffee maker
1
Fill the Water Reservoir (10) with cold water.
Do not overfill.
• T
ake your coffee maker out of the box and re-
move the packaging.
• W
ash the detachable parts of the machine in
warm soapy water.
• T
he first time you use your coffee maker, operate
t
he coffee maker with water only.
• W
hen your coffee maker is plugged in, the display
will flash.
• T
o set the time, use the Hour
(
14)
a
nd Minute
(
15)
Buttons. The display is a 24 hour clock.
Before first use Setting the clock
6
Ensure the Jug is correctly placed on the Hot
Plate after serving. The Hot Plate will keep the
coffee warm for a maximum of 30 minutes.
5
The Anti Drip Valve (4) allows you to remove
the Jug and serve coffee while your coffee
maker is still brewing.
47070 Rev9.qxp_Layout 1 18/02/2015 10:53 Page 4