5
Switch off the coffee maker and allow 3 minutes
to cool before refilling with cold water.
After the brewing cycle has finished, your coffee
maker will activate the keep warm function which
will keep your coffee warm for 30 minutes.
The lights except the clock on the Display
(11) will
switch off when the keep warm cycle has
finished. The clock on the Display will remain on.
To switch the keep warm mode off, press the
‘On/Off Button
(12).
• Unplug your coffee maker and allow to cool.
• Do not immerse the coffee maker in liquid.
• Rinse the Water Reservoir (10) occasionally with
cold water. Do not use a cloth as any residue or
lint may be left behind to clog the coffee maker.
• Remove the Permanent Filter (8), discard any
used coffee and wash. Extended soaking helps to
remove coffee stains from the mesh.
• Wash the Glass Jug (6), Jug Lid (5), and
Removable Filter Holder (9) in warm soapy water.
Rinse and dry all parts thoroughly. Refit the Filter
and Filter Holder.
• Wipe all external surfaces, including the warming
plate, with a damp cloth and dry thoroughly.
• Care must be taken to ensure that the non-drip
valve situated on the bottom of the filter holder is
not damaged during cleaning.
• Never use harsh or abrasive cleaners.
• NO parts are suitable for cleaning in a
dishwasher.
Cleaning your coffee maker
Keep warm
Refilling your coffee maker
When you have selected the desired time
press the Auto Button (16), the Auto ON icon
will appear on the Display Screen. To Cancel,
press the Auto Button again.
To Next Page
Loading...
