EasyManua.ls Logo

Morphy Richards D90D23ELB8 - Microwave Installation Requirements; Placement and Freestanding Design; Ventilation and Clearance Specifications; Cable Safety and Positioning

Morphy Richards D90D23ELB8
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 3 3/6/2019
7
Installation
• This microwave is designed to be free standing and is not
intended to be used ‘built in’ or in a cabinet.
• Select a level surface away from televisions, cookers and
other heat producing appliances.
• Ensure adequate ventilation and allow a clearance of
➢ 5cm at each side of the oven
➢ 20cm clearance above the oven
➢ 10cm at the rear of the oven
➢ The minimum installation height is 85cm
• Ensure that the cable is not close to any sharp or hot
surfaces, or where it is likely to cause a trip hazard.