OPERATING YOUR MICROWAVE OVEN
2) Input the cooking time by pressing on the number buttons.
2)
Press "2", "0", "0", "0" to set the cooking time to 20 minutes.
3) Press " " to start cooking.
4) When the cooking is finished, the oven will beep 5 times.
Example: Setting cooking time of 20 minutes on power 80%.
1) Press " " once, "00:00" displays.
to select the required microwave power.
3) Press " " once to select the microwave cooking, then press on number buttons
4) Press " " to start cooking.
1) Press " " once, "00:00" displays.
3) Press "
"once to microwave power 100%.Then press on "8" to select
80% microwave power.
Power
Time
Cook
START
+30SEC
Time
Cook
START
+30SEC
Power
Your microwave oven is equipped with a clock. You must set the clock when you first install
your oven or after a power failure.
2) Press number buttons to set the hour and minute.
3) Finally, press " " and the time will be set.
For example: Set the time to 12:12pm.
1) Press " ";
2) Press "1", "2", "1", "2" to input the hour and minute and it displays "12:12";
3) Press " " and the time will be set.
Note: 1) ":" will flash when time has been set.
2) During the process of clock setting, if you press " ", the oven will go
back to the previous status automatically.
1) Press " ", "00:00" will be displayed and it is a 12 hours clock.
Clock
Clock
Clock
Clock
STOP
Cancel
Display
Microwave
power level
80%
Microwave power chart
Power on
number button
9
90%
8
7
70%
PL9
PL8
PL7
1 . CLOCK SETTING
2 . MICROWAVE COOKING
To Next Page
Loading...
