8
Cleaning your kettle
• WARNING: Always disconnect the plug from the mains and allow the kettle to
cool before cleaning.
• Wipe the outside with a damp cloth.
• IMPORTANT: Do not use abrasive cleaners on the outside of the kettle which may
scratch the surface.
Removing the Filter
1.
Allow the kettle to cool completely before removing the filter.
2.
Open the Lid (1) by pressing the Lid Release Button (2).
3.
Push the tab on the top of the Removable Limescale Filter (9) down and pull towards the
inside of the kettle and lift upwards to remove for cleaning.
4.
To refit the Removable Limescale Filter, rest the Filter inside the kettle and clip the tab back
into position until it clicks.
WARNING: Unless the Removable Limescale Filter is fitted correctly, it may fall out
when pouring.
WARNING: Never boil the kettle with the Removable Limescale Filter removed. It must
be attached to the kettle at all times.
To Next Page
Loading...
