Essentials Precise Steam Cleaner
Please read and keep these instructions
Quick start
1 Fill the tank up to a maximum of 1.0 litre of water (using warm water
will reduce the heat-up time). Screw cap on and tighten fully.
2 Attach the hose and required accessories.
3 Connect to the power supply.
4 Press the on/off button to start heat-up. When orange light turns off,
the steam is ready.
5 Press the trigger on the handle to release the steam.
6 Aim the steam safely: at the start water may be ejected. Hold over a
sink or bucket until excess water has cleared.
Descaling
Descale regularly, do not wait for a problem to occur. In very hard water
areas, we recommend using distilled water.
VC70536 MUK Rev 1
For replacement parts, help with using your Morphy Richards product,
problems and lots more, contact us by phone or through our website.
UUKK HHeellpplliinnee:: 00884455 007777 77770000
IIrreellaanndd 11880000 440099 111199