Morphy Richards Venture - Kettle Maintenance and Support; Cleaning and Filter Care; Descaling Procedure; Contacting Customer Support

5
• WARNING: Always disconnect the plug from
the mains and allow the kettle to cool before
cleaning.
• Wipe the outside with a damp cloth.
• IMPORTANT: Do not use abrasive cleaners on
the outside of the kettle which may scratch
the surface.
1.
Allow the kettle to cool completely before
removing the filter.
2.
Using the Lid Pull Handle (4), remove the Lid (3).
3.
Pull the Limescale Filter (1) upwards from its
holder.
4.
To refit the Limescale Filter, slide it into the side
wall guides of the filter holder until it clicks into
place.
WARNING: Unless the Limescale Filter is fitted
correctly, the kettle lid may not close and lock
securely.
WARNING: Never boil the kettle with the
Removable Limescale Filter removed. It must
be attached to the kettle at all times.
IMPORTANT: As this appliance is fitted with a
concealed element it must be descaled regularly.
The frequency of descaling depends on usage
and the hardness of the water in your area.
Excessive scale can cause the appliance to
switch off before boiling and may damage the
element, invalidating the warranty.
It is essential that regular descaling takes place.
We recommend descailing your kettle every
month.
Remove hard scale using a proprietary descaling
product suitable for stainless steel, glass or
plastic. Please follow the cleaning products
instructions carefully.
IMPORTANT: Ensure that the electrical
connections are completely dry before using
the appliance.
Descaling
Contact us
Helpline
If you are having a problem with your appliance,
please contact our Helpline, as we are more likely
to be able to help than the store you purchased
the
item from.
Please have the product name, model number
and serial number to hand when you contact us to
help us deal with your enquiry quicker.
Website: www.morphyrichards.co.uk
E-mail: hello@morphyrichards.co.uk
Removing the Filter
Cleaning your kettle
KT100130 MUK Rev2_IB 16/02/24 Page 5