Notice
Guidance on feeding water and disassemble & washing of the
water tank
INSTRUCTIONS
Please clean up water accumulated at the bottom of the water tank in a timely manner when the product
is left unused.
Please remove the power plug when feeding water and cleaning.
Please make sure that the water pump module is fixed in position before startup. Random displacement
of the water pump module can cause the abnormalities of the product in cool wind function.
INSTALLATION INSTRUCTIONS
1 Take the two parts of the base out of the box, align the centers of the two bases and
place them crosswise, then rotate one of the bases to align the holes and snap them
together.
2 Align the fuselage clip line with the base clip line, and press the fuselage into the base,
you can fix it with screws at the mark of the base.
6
Feeding water:
Separate water pump module, and fully pull out the water tank, to feed water or clean the water tank.
To Next Page
Loading...
