and the remaining water in the ice tray is drained back into the water reservoir. The
ice cubes are then dropped from the evaporator and pushed forward into the ice
basket by the ice shovel. The ice tray will automatically move back into position
under the evaporator and the next cycle will start.
10. The “ ” indicator will light up when the ice basket is full and then the ice
maker will stop the ice-making cycle automatically. Gently remove the ice from the
ice basket with the ice scoop. About 5 seconds later, the ice maker will restart its
function automatically.
11. The “ ” indicator will light up when the water reservoir is lack of water and
the ice-making cycle will stop automatically. At that time, remove the ice basket and
add water into the water reservoir. Then press ” ” button again to restart the ice-
making cycle.
12. When you have got your desired amount of ice, stop the ice making cycle by
pressing the ” ” button and unplug the unit from the wall outlet.
13. Open the top lid and transfer the ice to a freezer.
NOTE: The ice will last in the ice maker for up to a 18 hour period, depending on the
ambient temperature.
14. Allow the ice maker to reach room temperature.
15. It is suggested that you replace the water once a week. Please empty the water
reservoir if the ice maker is not used for a long time.
CLEANING AND MAINTENANCE
1. Stop the ice-making cycle by pressing the ” ” button, unplug the ice maker from
the wall outlet and allow it to warm up to room temperature.
2. If residual water is found in the ice tray, gently push the ice tray back so that all
water drains into the water reservoir.
To Next Page
Loading...