Morris DIM-12146 - Troubleshooting

Fig.4 Fig.5
TROUBLESHOOTING
Problem
Possible causes
Solution
“ ”indicator
turns on
1.Low water level or
lack of water
2.The water screen at
the bottom of water
reservoir is blocked.
3.Pump malfunction.
1.Stop making ice, refill water and then press
“ ” button to restart ice-making cycle.
2.Do cleaning
3.Send it to the authorized department for
repair.
“ ” indicator
lights up
1.Ice basket is full and
the infrared light is
blocked by the ice.
2.Infrared light-
emitting diode & light-
receiving diode do not
work
1.Remove the ice from ice basket.
2a. Wipe up the foreign objects on the
infrared light-emitting diode & light-
receiving diode and restart the ice maker.
2b. Call Customer Service if the infrared
light-emitting diode & light-receiving diode
still can not work after wiping up the foreign
objects on them and restarting the ice maker.