EasyManua.ls Logo

Morris S1254BLG - CLEANING AND STORAGE; Maintenance and Storage Procedures; SPECIFICATION; Technical Specifications

Morris S1254BLG
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CLEANING AND STORAGE
1. In addition to this section, you must refer to the security precautions too.
2. Do not clean the Motor main body, power cord and plug with water.
3. Clean the engine base with a soft, wet piece of cloth and a mild cleaning agent.
4. Fill the glass jar half-full with hot water and a small quantity of a cleaning agent. Let the
unit run on min (minimum) speed until the glass jar is clean.
5.The base can be taken apart from the blades . Unscrew the base counter-clockwise.
Take out the blades together with the sealing ring facing upwards.
6. Now clean the glass jar, jar cover, closure, base and blades with sealing ring or speed
blender with hot water and some cleaning agent. Dry well before re-using.
Caution! The blades inside the glass jar and speed blender are very sharp.
7. Never use drastic cleaning agents.
Warning:
Do not touch the sharp blades while cleaning, please wipe with a dish cloth, to
avoid accidental injury.
SPECIFICATION
Rated voltage : 230V/50Hz
Power 700W
Capacity 1.7L
Operating time 1 minute
NOTE
1. Unit suitable for household use only.
2. Do not use for commercial purposes, otherwise the exclusive
importer bears no responsibility for any damage.