If the motor or reel doesn't turn when
the switch is pressed.
If the motor or reel doesn't turn.
If there is power but it still doesn't work.
Check for the over load reset button under the switch.
Press it in to reset.
Check to make sure 12V power is coming from the
power source.
Remove the motor cover by taking out the 2 Allen
screws and gently pull the cover back to check for any
loose connections between the motor, switch, or the
reset switch.
If you have any questions regarding the installation procedure or have diculty with any of the
steps, please give us a call at 574-293-1581 or email parts@morryde.com.
TROUBLE SHOOTING
574.293.1581
•
MORryde.com
•
To Next Page
Loading...
