To Next PageTo Next Page
Need help?Do you have a question about the Morso 3600 Series and is the answer not in the manual?
Instructions for safely removing the stove from its packaging and preparing it for leg attachment.
Verify that internal components like fire bricks are in place and the air control functions correctly.
Requirements for connecting the stove to a safe and functional chimney or flue system.
Guidance on connecting the stove's flue collar to the chimney connector, including rear exit options.
Details on how to connect the stove to an existing masonry or factory-built chimney.
Specifies safe clearances to combustible and non-combustible materials and alcove installation.
Essential checks before lighting, including fuel type, condition, and initial fire procedures.
Step-by-step guide for lighting the stove and reloading wood for optimal burning.
Instructions for cleaning and maintaining the stove's painted exterior surface.
Guidance on cleaning the glass, replacing glass, and general care for internal parts.
Procedures for cleaning ash, creosote, and ensuring the chimney and connector are clear.
Recommendations for preparing the stove for periods of non-use to prevent damage.
A detailed visual breakdown of all stove components with numbered references.
A comprehensive list of all stove parts with corresponding part numbers for different models.
General| Fuel Type | Wood |
|---|---|
| Flue Diameter | 6 inches |
| Material | Cast Iron |
| Category | Stove |
| Flue Outlet | Top |
