To Next PageTo Next Page
Need help?Do you have a question about the Morso 1410 and is the answer not in the manual?
General| Material | Cast Iron |
|---|---|
| Fuel Type | Wood |
| Flue Outlet | Top or Rear |
| Flue Outlet Diameter | 125 mm |
| Flue Diameter | 125 mm |
| Heating Capacity | Up to 75 m² |
| Max Log Length | 30 cm |
Verify that internal components like the grate, fire bricks, and baffle are properly positioned after unpacking.
Details required chimney types, internal dimensions, and recommended length for optimal draft and performance.
Instructions for connecting the stove's flue collar to the chimney system, including material and diameter specifications.
Guidance on connecting the stove to an existing chimney, including material choices and clearance recommendations.
Recommendations for placing the stove near walls, specifying minimum distances to combustible and non-combustible materials.
Pre-operation checks, safety precautions, and first fire guidance for curing paint and settling components.
Techniques for starting fires and adding fuel, covering both anthracite and bituminous coal.
Instructions for cleaning and touching up the stove's heat-resistant paint finish.
Guidance on cleaning the glass, replacing ceramic glass, and maintaining internal parts like gaskets.
Procedures for cleaning soot from the stove, baffle plate, flue outlet, and the entire chimney system.
Advice on preparing the stove for storage, preventing rust, and ensuring airflow.
Recommended annual checks and cleaning tasks before the heating season, including chimney inspection and gasket checks.
Visual representation of all stove components with numerical identifiers.
Detailed list of all stove parts, including their corresponding part numbers.
