Need help?Do you have a question about the Morso 1010 and is the answer not in the manual?
General| Model | 1010 |
|---|---|
| Category | Stove |
| Material | Cast Iron |
| Fuel Type | Wood |
| Flue Diameter | 125 mm |
| Height | 730 mm |
| Width | 460 mm |
Details unpacking the stove and initial assembly steps.
Covers compliance with building regulations and the importance of chimney sweeping.
Specifies required distances to combustible materials, floor, and furniture.
Outlines chimney suitability, cross-sectional area, and maintenance access.
Explains how to connect the flue collar to the stove for top or rear outlets.
Describes connecting the stove to a brick or masonry chimney.
Details connecting to a stainless steel insulated chimney system.
Explains the need for adequate air supply for proper stove operation.
Discusses factors affecting chimney draft and how to achieve optimal performance.
Guides on lighting the stove using the "top-down" method and initial firing.
Details how to refuel the stove and control the burn rate with air supply.
Provides advice on door handling, fuel types, and efficient burning.
Covers cleaning and care for the stove's painted exterior surface.
Discusses maintenance of glass, firebricks, gaskets, and internal components.
Explains how to clean the stove and manage ash and debris.
Outlines the terms and conditions of the 10-year manufacturer's guarantee.
Summarizes key safety points for environmentally friendly and safe stove operation.
To Next Page
