7. Place two pieces of fuel weighing roughly
2-4 pound and measuring about 25 cm in
length across the embers in one layer, with
spacing of roughly 1 cm between the pieces
of wood.
8. When the primary air supply is opened all the
way and the door is closed, the new fuel will
ignite in a few minutes.
9. Once the new fuel has taken, adjust the
secondary air amount to the desired setting;
optimal combustion will continue until
glowing embers are produced.
Under normal chimney draft conditions,
expect to refuel your stove every 60 - 70
minutes.
10. A new charge of wood can be added by
repeating steps 6 & 7.
To Next Page
Loading...
