Need help?Do you have a question about the Motinova CS800 Series and is the answer not in the manual?
Attach the cycle computer controller and display to the handlebars and adjust viewing angle.
Install screws with a recommended torque of 0.8 Nm to secure components.
Explanation of key display elements: Time, Speed, Mileage, Power, Unit, Battery, and Light.
Overview of the primary buttons: Power, '+', '-', Setting, and Walk assist.
Manage device power and bicycle light using dedicated buttons.
Select and adjust power assist levels, including special SMART mode.
Switch between different data views like total mileage, trip, max speed, and cadence.
Engage and use the Walk mode for powered assistance up to 6 km/h.
Procedure to access the main setting interface via button presses.
Option to reset subtotal mileage and subtotal ride time.
Configure display units for mileage (Km/Mile) and speed.
Adjust screen backlight brightness from 1 to 5 levels.
Adjust tire circumference for accurate distance measurement.
Set the system time according to the current geographical area.
Configure power modes: Comfort, Standard, and Dynamic.
Set the system date (Day, Month, Year) according to the geographical area.
Enable or disable the display of the battery percentage.
Set the automatic power-off duration, adjustable in 5-minute intervals.
View historical fault information, showing the latest fault code first.
Query system information like wheel size, speed limit, battery status, and firmware versions.
Restore instrument parameters to default values.
Shows fault codes for motor, battery, display, and buttons, with cycling display for multiple faults.
List of Motor Controller (MC) related faults, descriptions, and solutions.
List of Battery Management System (BMS) related faults, descriptions, and solutions.
Further BMS faults including temperature alarms and MOS over-heat.
List of Power Button Unit (PBU) faults and troubleshooting steps.
List of Human-Machine Interface (HMI) communication faults.
Specifies the device material as Plastic and operating temperature range.
Details operating voltages and dimensions of the controller and display.
Lists compatible handlebar diameters and the device's IP protection grade.
To Next Page
General