What to do if Motion 4 Doors EvoDrive+ Door Opening System detects obstruction during closing?
If the Motion 4 Doors Door Opening System detects an obstruction during the closing cycle, make sure to check and remove any obstructions in the opening traveling area.
What to do if Motion 4 Doors EvoDrive+ Door Opening System detects obstruction during opening?
If the Motion 4 Doors Door Opening System detects an obstruction during the opening cycle, check and remove any obstructions in the opening traveling area.
What to do if Motion 4 Doors Door Opening System leaf does not move?
If the leaf of your Motion 4 Doors Door Opening System isn't moving, here are a few things to check: * Ensure the leaf can be moved manually and smoothly. * Verify the operator is not in open mode. * Confirm that I/O Accessories is switched ON. * Check that the sensors/accessories have been connected correctly.
Why is the Motion 4 Doors EvoDrive+ Door Opening System leaf moving too slow?
If the leaf of your Motion 4 Doors Door Opening System is moving too slowly: * Check if the operator is in Low Energy mode. * Ensure that no item is generating excessive friction. * Adjust parameters 11 and 12 of the display, decreasing their value. * Alternatively, adjust parameters 11 and 12 of the display, increasing their value.
General| Brand | Motion 4 Doors |
|---|---|
| Model | EvoDrive+ |
| Category | Door Opening System |
| Language | English |
To Next Page
