Motion CM-12 - Single Select Functionality; Activating Single Select Mode; Blind Search and Program Mode Confirmation

12
1
1
5
5.1 5.2 5.3
Single select makes it possible to activate program mode on
a single blind through a remote control, without having to
physically press the program button on the blind.
Single select 5 channel remote
+
The remote
starts searching
for blinds (search
mode). This is
indicated by the
LEDs flashing
from left to right.
To activate
Single select,
simultaneously
hold the centre
button and press
the pair button.
Once a blind is found,
the channel LED will
flash and the blind
starts stepping,
indicating that program
mode has been
activated. The blind
can now be (un)paired
with the remote and/or
programmed.
5. SINGLE SELECT 5 CHANNEL REMOTE