Need help?Do you have a question about the Motion CM-12 and is the answer not in the manual?
Covers keeping away from children, ensuring blind movement, keeping dry, avoiding drops/knocks.
Covers coin cell ingestion, keeping batteries from children, incorrect replacement, and disposal hazards.
Use a damp, soft, lint-free cloth; avoid moisture and chemicals.
Warns against opening or disassembling the device due to shock risk and warranty voiding.
Advises consulting the manual and local dealer for product issues.
Explains EU disposal rules and options for returning used devices for safe recycling.
Declares compliance with EU directive 2014/53/EU, with full text online.
States no user-serviceable components and requirement for approved antennas.
Confirms compliance with FCC Part 15 rules and specifies operational conditions.
Details Class B device limits, potential interference, and user remedies for radio communications.
Describes the purpose and function of key buttons like center, channel selection, and pair.
Step-by-step guide on how to open the remote and replace the battery.
Explains that a high-frequency flashing channel indicator signals the need for battery replacement.
Instructions for attaching the remote holder, emphasizing suitable screws for different materials.
Visual guide illustrating the steps to pair a remote control with a blind.
Describes pressing the motor's program button to initiate blind stepping and program mode.
Explains selecting a channel on the remote and pressing the pair button to link the blind.
Notes that repeating the pairing steps can be used to unpair a blind from a channel.
Describes holding the center and pair buttons to activate single blind selection mode.
Explains the remote enters search mode, finds a blind, and confirms program mode with LED flashing and blind stepping.
Details using left/right buttons to search for previous or next blinds.
Explains how to exit the search mode by pressing the right button.
Explains copying blinds between channels/remotes without manual motor interaction.
Describes selecting the source channel and pressing the channel selection and pair buttons simultaneously.
Details blind stepping, selecting a new channel, and pairing to copy blinds.
Explains how to exit by returning to the original channel and repeating the activation step.
Covers keeping away from children, ensuring blind movement, keeping dry, avoiding drops/knocks.
Covers coin cell ingestion, keeping batteries from children, incorrect replacement, and disposal hazards.
Use a damp, soft, lint-free cloth; avoid moisture and chemicals.
Warns against opening or disassembling the device due to shock risk and warranty voiding.
Advises consulting the manual and local dealer for product issues.
Explains EU disposal rules and options for returning used devices for safe recycling.
Declares compliance with EU directive 2014/53/EU, with full text online.
States no user-serviceable components and requirement for approved antennas.
Confirms compliance with FCC Part 15 rules and specifies operational conditions.
Details Class B device limits, potential interference, and user remedies for radio communications.
Describes the purpose and function of key buttons like center, channel selection, and pair.
Step-by-step guide on how to open the remote and replace the battery.
Explains that a high-frequency flashing channel indicator signals the need for battery replacement.
Instructions for attaching the remote holder, emphasizing suitable screws for different materials.
Visual guide illustrating the steps to pair a remote control with a blind.
Describes pressing the motor's program button to initiate blind stepping and program mode.
Explains selecting a channel on the remote and pressing the pair button to link the blind.
Notes that repeating the pairing steps can be used to unpair a blind from a channel.
Describes holding the center and pair buttons to activate single blind selection mode.
Explains the remote enters search mode, finds a blind, and confirms program mode with LED flashing and blind stepping.
Details using left/right buttons to search for previous or next blinds.
Explains how to exit the search mode by pressing the right button.
Explains copying blinds between channels/remotes without manual motor interaction.
Describes selecting the source channel and pressing the channel selection and pair buttons simultaneously.
Details blind stepping, selecting a new channel, and pairing to copy blinds.
Explains how to exit by returning to the original channel and repeating the activation step.
General| Brand | Motion |
|---|---|
| Model | CM-12 |
| Category | Remote Control |
| Language | English |
To Next Page