Need help?Do you have a question about the MOTO GUZZI V7 II ABS and is the answer not in the manual?
General| Transmission | 6-speed |
|---|---|
| Final Drive | Shaft drive |
| ABS | Yes |
| Engine Type | V-twin, 4-stroke |
| Torque | 60 Nm at 2, 850 rpm |
| Frame | Double cradle tubular frame in ALS steel |
| Front Suspension | 40 mm hydraulic telescopic fork |
| Rear Suspension | Double shock absorber with adjustable spring preload |
| Front Brake | 320 mm disc, 4-piston caliper |
| Rear Brake | 260 mm disc, 2-piston caliper |
| Fuel Capacity | 21 liters |
| Seat Height | 770 mm |
Important safety precautions for operating the vehicle, including handling fuel and hot components.
General guidelines and precautions for vehicle maintenance procedures and component handling.
Technical specifications and details related to the vehicle's engine.
Technical specifications for the gearbox and gear ratios.
Fluid capacities for the fuel tank, engine oil, gearbox, and transmission.
Details on the vehicle's frame structure and suspension system components.
Specifications for wheel rims, tyre models, and inflation pressures.
Technical specifications for the front and rear brake systems.
Overview of the ABS system, its components, and ECU pin configuration.
Explanation of how the ABS system functions during braking.
Routine maintenance schedule based on mileage intervals for all vehicle systems.
Procedures for checking and replacing engine oil, including capacity.
Procedure for draining and refilling gearbox oil.
Overview of the vehicle's electrical components and their arrangement.
Procedures for installing and routing the vehicle's electrical system components.
Detailed procedures for front wheel removal and installation.
Detailed procedures for rear wheel removal and installation.
Specifications and removal/installation of the rear swingarm and related components.
Technical specifications and diagrams for the exhaust system components.
Step-by-step guide for removing the motorcycle's tail pipe.
Checks for paintwork, plastic parts, scratches, and dirt before delivery.
Verification of torque settings for various fasteners and components.
Checks for hydraulic, clutch, gearbox, transmission, coolant, and engine oil levels.
Procedures for conducting a road test after delivery preparation.
Inspection of braking, clutch, engine operation, documentation, and accessories.
To Next Page