Need help?Do you have a question about the MOTO GUZZI V7 Sport and is the answer not in the manual?
General| Displacement | 748 cc |
|---|---|
| Bore x Stroke | 82 mm x 70 mm |
| Compression Ratio | 9.8:1 |
| Transmission | 5-speed |
| Final Drive | Shaft drive |
| Front Suspension | Telescopic forks |
| Engine Type | Air-cooled, 90° V-twin |
| Max Power | 52 hp at 6200 rpm |
| Max Torque | 54 Nm at 5000 rpm |
| Rear Suspension | Twin shock absorbers |
| Rear Brakes | Drum |
| Fuel System | Carburetor |
| Frame | Steel tubular |
Guidelines for initial use and break-in period for optimal engine performance and longevity.
Identification and explanation of the motorcycle's various controls and accessories.
Detailed specifications of the V7 Sport's engine, including bore, stroke, displacement, and compression ratio.
Explanation of the O.H.V. push rod system and valve timing for inlet and exhaust.
Information on the Dell'Orto carburetors, settings, and adjustment procedures.
Overview of the lubrication system, oil pressure, and components like the oil strainer.
Description of the air cooling system for the cylinder and cylinder head.
Details on the battery ignition with double contact breaker and automatic advance.
Recommended spark plug types and gap settings for optimal engine performance.
Explanation of the electric starter mechanism and its operation.
Description of the dual exhaust pipes and silencers.
Details on the clutch and gearbox, including type and number of speeds.
Information on the five-speed gearbox, engagement, and its separate housing.
Details on the cardan shaft, bevel gears, and overall gear ratios.
Description of the duplex cradle, tubular structure frame.
Details on the telescopic front fork and rear swinging fork with adjustable springs.
Information on the front and rear wheel sizes.
Details on tire sizes, types, and recommended inflation pressures.
Description of the expanding type front and rear brake systems.
Key dimensions like wheelbase, length, width, height, ground clearance, and curb weight.
Table showing speeds and gradients for each gear, and fuel consumption.
Table detailing the required quantities and recommended types of fuel and oils for various parts.
Identification and explanation of the gauges and warning lights on the instrument panel.
Operation of the ignition key, starter button, and initial engine start steps.
Guidance on starting, riding, shifting gears, and safely stopping the motorcycle.
List of maintenance tasks to be performed monthly, such as checking battery electrolyte.
Checks to be performed periodically, including tire pressure and tappet adjustment.
Maintenance tasks scheduled for 300, 1000, 10000, and 20000 km intervals.
Procedure for checking and changing the engine oil using the dipstick.
Information on the oil pressure relief valve and gauge indicator light.
Procedure for checking and changing the oil in the gearbox.
Procedure for checking and changing the oil in the rear wheel drive box.
Instructions for changing the oil in the front fork tubes.
Lubrication of steering bevels, wheel bearings, control cables, and rear fork bearings.
Details on the Del'Orto carburetors, twist grip, and easy start lever.
Table of standard settings for choke, throttle slide, jets, and float.
Step-by-step guide for adjusting carburation, including throttle slide synchronization and idling speed.
Procedure for checking and adjusting tappet clearance on a cold engine.
Recommendation for checking valve timing, suggesting dealer service for accuracy.
Instructions for lubricating, inspecting, and adjusting the double contact breaker points.
Procedure for checking and adjusting ignition timing using timing marks and a timing light.
Details on spark plug types, maintenance, and cable connections to ignition coils.
Procedure for cleaning fuel filters, lines, tank, and fuel tap.
Procedure for decarbonizing cylinder heads, cleaning combustion chambers, and valves.
Instructions for cleaning the silencers internally using boiling water and caustic soda.
Procedure for adjusting the clutch lever free play at the handlebar.
How to remedy loose steering by adjusting the steering head fixing bolt and nut.
Adjusting front brake lever play and rear brake pedal play/position.
Adjusting rear suspension springs and gear operating mechanism for smooth engagement.
Step-by-step instructions for removing the front wheel.
Step-by-step instructions for removing the rear wheel.
Details on battery electrolyte level checks, topping up, and charging procedures.
Instructions for generator commutator cleaning and regulator unit information.
Procedure for cleaning the starter motor commutator and checking brushes.
Information on horn, fuses, lights, switches, and bulb specifications.
List of bulb types and wattages for headlights, instruments, and indicators.
To Next Page