Need help?Do you have a question about the Motocaddy S3 PRO and is the answer not in the manual?
A space to record the trolley's serial number for future reference.
Step-by-step instructions for correctly attaching the trolley wheels.
Utilise the outer groove for a 'free-wheel' function when battery power is low.
Charge batteries soon after use; use only Motocaddy chargers for Motocaddy batteries.
Store and charge on a dry surface between 10°C and 30°C.
Disconnect, plug in, attach cable, follow LED stages, and disconnect.
Avoid moisture, charge at intervals if unused, note initial charge time.
Unplug, plug in charger, connect cable, wait for green LED indicator.
Avoid water, protect from drops, do not lift by cable, clean with damp cloth.
Store batteries half-charged for periods of 3+ months to extend life.
Explains BMS features for protection against abuse, discharge, and overcharge.
Step-by-step guide to unfolding the trolley using the QUIKFOLD™ system.
Do not lift from the handle during unfolding as it complicates the process.
Steps to fold the trolley, including battery removal and QUIKFOLD™ system use.
Instructions for attaching EASILOCK™ compatible bags to the trolley.
Steps for securing non-EASILOCK bags using elasticated straps.
How to attach upper bag support straps, similar to non-EASILOCK bags.
Guide to tightening or loosening the elasticated bag support straps.
How the trolley automatically cuts power to the motor to prevent damage.
Trolley is for golf bags only; do not transport people or other equipment.
Do not submerge, operate under influence, disconnect batteries for transport.
Avoid rain, wipe dry, no pressure washer, perform regular checks.
Trolley USB port powers GPS devices; charging speed is slower than mains.
Steps to adjust front wheel alignment using dials to correct veering.
Labeled diagram showing all parts of the S1 PRO trolley.
How to turn on/off and control speed using the main button and dial.
Explanation of the LEDs for power status and battery capacity.
How to set the trolley to travel a specific distance (15-45 meters).
Trolley cuts power if distance is not registered in ADC mode.
Labeled diagram showing all parts of the S3 PRO trolley.
List and explanation of controls on the S3 PRO digital panel.
How to activate the panel by connecting the battery.
Step-by-step instructions for setting the clock on the S3 PRO.
How to set the battery meter for Standard or Lithium batteries.
How to start, stop, and change the speed of the S3 PRO trolley.
How to set the trolley to travel a specific distance.
Explains Distance 1, Distance 2, and Total Distance readouts.
How to switch between yards and meters for distance readings.
How to operate the timer to track lost balls.
How to reset and use the timer for tracking a golf round.
Temporarily disable distance measuring functions for competition play.
Steps to set a PIN code to make the trolley unusable by thieves.
Warning to record the PIN; losing it requires returning the trolley for reset.
Instructions to change the current security PIN.
How to disable the PIN feature by entering four zeros.
Follow diagnosis diagrams; place trolley folded, remove wheels for handling.
Suggests re-charging and checking charger if trolley fails to complete a round.
Flowchart to diagnose why the trolley is not moving, checking LEDs and parts.
Diagnosis for trolley moving at a single speed, checking speed change and switches.
Details of Motocaddy Ltd, product type, and standards used.
Provides contact information for Profi Golf s.r.o. and Motocaddy.
General| Model | S3 PRO |
|---|---|
| Category | Electric Golf Trolley |
| USB Charging Port | Yes |
| Material | Aluminum |
| Motor Power | 230W |
| Voltage | 12V |
| Charging Time | 4-5 hours |
| Display | LCD |
| Distance Measurements | Yes |
| Adjustable Distance Control | Yes, up to 60 yards |
| Battery | Lithium |
| Range | Up to 36 holes |
To Next Page
