Need help?Do you have a question about the Motomaster 009-1032-0 and is the answer not in the manual?
General| Brand | Motomaster |
|---|---|
| Model | 009-1032-0 |
| Category | Jacks |
| Language | English |
Ensure proper working area, weight capacity, vehicle stability, and safe footing for operation.
Perform preliminary checks and use jack only on hard, level, smooth, and clean surfaces.
Avoid soft surfaces; immediately stop and evacuate if jack tips or leans.
Follow capacity limits, operator qualifications, body positioning, and usage restrictions.
Ensure load is centered, fixed, and equipment is undamaged before operation.
Attach bracket seat assembly to foot base using screws, washers, and nuts.
Insert casters into designated holes and secure with washers, lock washers, and nuts.
Mount pump assembly upright onto bracket seat assembly using bolts, washers, and nuts.
Mount bracket plate assembly, slide, and chain components securely onto the piston rod.
Purge air from the hydraulic system and consult vehicle manual for lifting surfaces.
Position jack, ensure load capacity, lower gently, and transport securely on level surfaces.
Review safety instructions, prepare vehicle correctly, and ensure load stability.
Understand the 'Dead Man' release valve for controlled descent.
Store with saddle low, keep clean, lubricate parts, and perform periodic corrosion checks.
Contact dealer for sealed oil cylinder service; use only specified jack oil.
Perform pre-use checks for good working order; do not use if subjected to abnormal load/shock.
Dispose of hydraulic oil according to local regulations; avoid polluting the environment.
Recycling materials contributes to protecting the environment and resource conservation.
To Next Page
